Date: Mon, 3 Nov 1997 09:33:29 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Karel Sandler
Subject: Pomoc s HDD
Mime-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Prosim o kontakt na prazskou firmu, ktera se specializuje
na nouzove precteni castecne porouchanych disku. Nazev ani
telefon jsem si drive bohuzel nepoznamenal.
Diky,
K Sandler
Spravce site UJF AVCR
Date: Mon, 3 Nov 1997 13:27:09 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: LukasMichaelFronk
Subject: Re: Pomoc s HDD
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
> Prosim o kontakt na prazskou firmu, ktera se specializuje
> na nouzove precteni castecne porouchanych disku. Nazev ani
> telefon jsem si drive bohuzel nepoznamenal.
Ja to stejny, ale na brnenskou !!!
_________________
LukasMichaelFronk@lefro.cz
http://www.lefro.cz
http://www.bolek.cz
Date: Mon, 3 Nov 1997 16:13:19 +0000
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
Comments: Authenticated sender is
From: Jan Vejvalka
Subject: Re: Pomoc s HDD
In-Reply-To:
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7BIT
> Prosim o kontakt na prazskou firmu, ktera se specializuje
> na nouzove precteni castecne porouchanych disku.
Byl jsem kdysi kdesi u kohosi na Vinohradech, a odtud jsem
utekl. Pak jsem nasel firmu
TDP, s.r.o., Na Slupi 2a, tel. 299760, Fax. 24914814, a tam mi
pripadali, ze toho o veci vedi dost. Takze jim rad udelam tuhle
reklamu.
Jsou taky na http://www.tdp.cz .
Zdravim
Jan Vejvalka
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Dr. Jan Vejvalka
Inst. of Clinical and Applied Informatics
2nd Medical Faculty, Charles University
V uvalu 84 fax: +420 2 2443 5820
150 06 Praha 5 voice: +420 2 2443 1006
Czech Republic internet: Jan.Vejvalka@lfmotol.cuni.cz
** Knowledge is nothing if not shared ... (LE07144@UKANVM.BITNET) **
Date: Sun, 9 Nov 1997 21:16:51 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Pavel Cerny
Subject: Slackware na CD-ROM
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Vazeni kolegove,
nevite, zda nekdo v CR prodava Slackware distribution Linuxu na CD-ROM?
Vim o Red Hatu od kol. Satrapy z Liberce, ale Slackware je mi nejak sympatic-
tejsi svou organizaci. Jestlize ano, pak prosim, kdo a za kolik. Samozrejme
vim, ze si to mohu stahnout po siti treba ze sunsite.mff.cuni.cz, a zadarmo.
Diky predem. Zdravi Pavel Cerny
--
------------------------------------------------------------------------------
| Ing. Pavel Cerny E-mail: cerny@utia.cas.cz |
| Inst. of Inform. Theory and Automation AS CR Phone: +420-2-6605 2255 |
| Pod vodarenskou vezi 4 Home: +420-2-858 3421 |
| CZ-182 08 Praha 8 - Liben Fax: +420-2-688 4677 |
------------------------------------------------------------------------------
Date: Mon, 10 Nov 1997 09:40:32 +-100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: gyza
Subject: Re: Slackware na CD-ROM
nevite, zda nekdo v CR prodava Slackware distribution Linuxu na CD-ROM?
Pred nejakym casem jsem ji koupil na adrese Application Software Brno s. r.
o., Bozetechova 2, 612 66 Brno.Tel./fax 05/41211479, tel 05/740741
e-mail neznam.
pek@ns.gyza.cz
begin 600 WINMAIL.DAT
M>)\^(B$(`0:0" `$```````!``$``0>0!@`(````X@0```````#F``$-@ 0`
M`@````(``@`!!) &`#@!```!````# ````,``# #````"P`/#@`````"`?\/
M`0```%4`````````@2L?I+ZC$!F=;@#=`0]4`@````!$:7-K=7-E(&\@;6ES
M=&YI8V@@<')O8FQE;65C:"!V('-I=&D`4TU44 !#4TE.1D\M3$!#15-.150N
M0UH`````'@`", $````%````4TU44 `````>``,P`0```!,```!#4TE.1D\M
M3$!#15-.150N0UH```,`%0P!`````P#^#P8````>``$P`0```"<````G1&ES
M:W5S92!O(&UI# $`
M```%````4TU44 `````>`!\,`0````P```!P96M 9WEZ82YC>@`#``80=&7U
M"0,`!Q#)````'@`($ $```!E````3D56251%+%I$04Y%2T1/5D-24%)/1$%6
M05-,04-+5T%2141)4U1224)55$E/3DQ)3E5854Y!0T0M4D]-/U!2141.14I!
M2UE-0T%314U*4T5-2DE+3U5024Q.04%$4D5314%04 `````"`0D0`0```*,!
M``"?`0``A0(``$Q:1G4[$^*V_P`*`0\"%0*H!>L"@P!0`O()`@!C: K @J/%QM?,M(6<0`U0 `#`! 0``````,`$1 `````0 `',("-NONR[;P!
B0 `(,("-NONR[;P!'@`]``$````%````4D4Z( ````"-QP`'
`
end
Date: Mon, 10 Nov 1997 15:39:41 -100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: PUCHYR@KCHZ.FME.VUTBR.CZ
Organization: Katedra procesniho inzenyrstvi
Subject: Odstraneni NT 3.51
X-To: csinfo-l@adis.cesnet.cz
Vazeni,
potrebuji odstranit (vymazat) Win NT 3.51 a hlavne jejich
blokovani zapisu na hard. Bohuzel nemam heslo administratira a to
ktere mam me je na nic. Byl mne totiz predan do pouzivani pocitac bez
administratorskeho hesla a me stare ma docela vyrazne omezeni.
Administrator je nedosazitelny a tak nemohu menit konfiguraci. Az se
ale vrati, tak z neho nadelam 4 male do skolky. Kdo vite jak to resit
tak me napiste.
Pecan
P.S. Potrebuji to do patku.
Date: Tue, 11 Nov 1997 08:45:02 +0000
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
Comments: Authenticated sender is
From: Jan Vejvalka
Subject: Re: Pomoc s HDD
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7BIT
> Prosim o kontakt na prazskou firmu, ktera se specializuje
> na nouzove precteni castecne porouchanych disku.
Byl jsem kdysi kdesi u kohosi v byte na Vinohradech, a odtud
jsem utekl. Pak jsem nasel firmu
TDP, s.r.o., Na Slupi 2a, tel. 299760, Fax. 24914814, a tam mi
pripadali, ze toho o veci vedi dost. Takze jim rad udelam tuhle
reklamu.
Jsou taky na http://www.tdp.cz .
Zdravim
Jan Vejvalka
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Dr. Jan Vejvalka
Inst. of Clinical and Applied Informatics
2nd Medical Faculty, Charles University
V uvalu 84 fax: +420 2 2443 5820
150 06 Praha 5 voice: +420 2 2443 1006
Czech Republic internet: Jan.Vejvalka@lfmotol.cuni.cz
** Knowledge is nothing if not shared ... (LE07144@UKANVM.BITNET) **
Date: Tue, 11 Nov 1997 08:47:31 +0000
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
Comments: Authenticated sender is
From: Jan Vejvalka
Subject: cesky qwerty driver pro klavesnici ve Win3.11
X-cc: "Dr. Jan Trka"
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7BIT
Dobry den,
nemate nekdo, prosim, cesky klavesnicovy driver pro Win
3.11, ktery by umel qwerty ?
Dekuji za pomoc
Jan Vejvalka
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Dr. Jan Vejvalka
Inst. of Clinical and Applied Informatics
2nd Medical Faculty, Charles University
V uvalu 84 fax: +420 2 2443 5820
150 06 Praha 5 voice: +420 2 2443 1006
Czech Republic internet: Jan.Vejvalka@lfmotol.cuni.cz
** Knowledge is nothing if not shared ... (LE07144@UKANVM.BITNET) **
Date: Tue, 11 Nov 1997 10:14:32 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Matousek Petr
Subject: Re: cesky qwerty driver pro klavesnici ve Win3.11
> nemate nekdo, prosim, cesky klavesnicovy driver pro Win
> 3.11, ktery by umel qwerty ?
Pustte si v DOSu v adresari Windows program SETUP a vyberte klavesnici
ceska (101 klaves). To je on.
Zdravi
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
+ Petr Matousek e-mail: matousek@chv.pvt.cz +
+ PVT a.s. phone : +420-396-619245 +
+ Skolni 5335, 430 01 Chomutov, CZ fax : +420-396-27051 +
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Date: Tue, 11 Nov 1997 14:18:28 MET-1MEST
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Ales Horak
Organization: Palacky Univ. Rector's Office
Subject: Re: Odstraneni NT 3.51
> potrebuji odstranit (vymazat) Win NT 3.51 a hlavne jejich
> blokovani zapisu na hard. Bohuzel nemam heslo administratira a to
> ktere mam me je na nic. Byl mne totiz predan do pouzivani pocitac bez
> administratorskeho hesla a me stare ma docela vyrazne omezeni.
> Administrator je nedosazitelny a tak nemohu menit konfiguraci. Az se
> ale vrati, tak z neho nadelam 4 male do skolky. Kdo vite jak to resit
> tak me napiste.
Vite jak funguje prikaz format (pripadne fdisk) ? :-)
--
Ales Horak
___________________________________________________________________
Palacky University Library
sys_admin();
http://tin.upol.cz/
Date: Tue, 11 Nov 1997 01:00:00 MET
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: =?ISO-8859-2?Q?Ji=F8=ED_Kuchta?=
Organization: UIVT FEI VUT Brno
Subject: Re: Slackware na CD-ROM
In-Reply-To: <01BCEDBC.B0EBA8C0@pek.gymnazium.cz>
MIME-Version: 1.0
Content-type: text/plain; charset=ISO-8859-2
Content-transfer-encoding: Quoted-printable
Dne 10 Nov 97 v 9:40, napsal(a) gyza :
> nevite, zda nekdo v CR prodava Slackware distribution Linuxu na CD-ROM?
>
> Pred nejakym casem jsem ji koupil na adrese Application Software Brno s.=
r.
> o., Bozetechova 2, 612 66 Brno.Tel./fax 05/41211479, tel 05/740741
> e-mail neznam.
mailto:ptacek@aps-brno.cz
>
> pek@ns.gyza.cz
>
>
>
----
Ing. Ji=F8=ED Kuchta (Jiri Kuchta)
Technical University of Brno;
Fac. off Electrical Engineering and Computer Science
Department of Computer Science and Engineering
Bo=BEet=ECchova 2; CZ-61266 Brno; Europe; Earth
+------------------------------------------------------------------
tel: +420-5-7275-222; +420-5-43167-322 fax: +420-5-41211141
mailto:kuchta@fee.vutbr.cz
http://www.fee.vutbr.cz/~kuchta
Fido: 2:421/13.7
+------------------------------------------------------------------
Pegasus Mail - ceska WWW:
http://www.fee.vutbr.cz/~kuchta/pmail
Pegasus Mail - ceska konference:
pmail-cz@fee.vutbr.cz
-----
Czech test: =EC=B9=E8=F8=BE=FD=E1=ED=E9
Date: Wed, 12 Nov 1997 08:30:35 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: "Ing.Petr Matya"
Organization: Desnį, a.s. ASŲ
Subject: Re: Odstraneni NT 3.51
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Ales Horak wrote:
>
> > potrebuji odstranit (vymazat) Win NT 3.51 a hlavne jejich
> > blokovani zapisu na hard. Bohuzel nemam heslo administratira a to
> > ktere mam me je na nic. Byl mne totiz predan do pouzivani pocitac bez
> > administratorskeho hesla a me stare ma docela vyrazne omezeni.
> > Administrator je nedosazitelny a tak nemohu menit konfiguraci. Az se
> > ale vrati, tak z neho nadelam 4 male do skolky. Kdo vite jak to resit
> > tak me napiste.
>
> Vite jak funguje prikaz format (pripadne fdisk) ? :-)
>
> --
>
> Ales Horak
> ___________________________________________________________________
> Palacky University Library
> sys_admin();
> http://tin.upol.cz/To samozrejme vime, ale co s daty?
Date: Wed, 12 Nov 1997 09:16:26 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Chudoba Jiri
Subject: SCSI
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Dobry den,
mohl by mi nekdo poradit, kde najdu informace o standardu SCSI, hlavne
o novejsich Ultra SCSI a Ultra Wide SCSI? Je mozne pripojit na
sbernici Wide Differential zarizeni s rozhranim Fast Wide (tedy ne
Differential)?
Dekuji.
Jiri Chudoba
********************************************************************
* E-mail address: Jiri.Chudoba@cern.ch *
* or: Jiri.Chudoba@mff.cuni.cz *
* WWW Homepage : http://hp02.troja.mff.cuni.cz/~chudoba/signature*
* Telephone : +420-2-2191 2453 *
* Fax : +420-2-2191 2434 *
********************************************************************
Date: Wed, 12 Nov 1997 15:30:18 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Michal Kratky
Subject: Re: SCSI
In-Reply-To:
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
On Wed, 12 Nov 1997, Chudoba Jiri wrote:
> Dobry den,
> mohl by mi nekdo poradit, kde najdu informace o standardu SCSI, hlavne
> o novejsich Ultra SCSI a Ultra Wide SCSI? Je mozne pripojit na
> sbernici Wide Differential zarizeni s rozhranim Fast Wide (tedy ne
> Differential)?
To vase zarizeni je bud Fast Wide Differential nebo Fast Wide Single
Ended. Musite si nejak zjistit, napr. dotazem na dodavatele, ktery
z obou pripadu to je. Jestlize je to Single Ended, potom to zcela jiste
*nejde* pripojit na cokoliv diferencialniho.
Rad bych vam se stejnou jistotou sdelil ze jakekoliv diferencialni
rozhrani lze funkcne spojit s jinym diferencialnim rozhranim. Tusim
ze tomu tak je, ale nejsem v te veci specialista.
Michal Kratky
Date: Wed, 12 Nov 1997 19:17:09 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: "Ondrej X. Dolezal"
Organization: Redigy
Subject: Internet Groupware?
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-2
Content-Transfer-Encoding: 7bit
Dobry den,
prominte cross-posting, tezko se hleda spravna newsgroup.
Hledam reseni problemu provozovani skupinoveho planovani
bez moznosti mit uzivatele na 1 siti, situaci kdy spojenim
je Internet.
Existuje nejaky, dostupny na siti (lepe) nebo komercni
software ekvivalentni aplikacim jako Organizer ci Schedule+,
umoznujici data nikoli sdilet nybrz pomoci Internetu distribuovat?
Vhodnou formou je posilani automatickych mailu se zmenami
v datech. Nebo: system sdilejici data na serveru, ovsem
klienti se pripojuji jen obcas - a navic serverem je UNIX?
Predem diky za kazdy napad,
-- ondrej x. dolezal --------------------------------------------------
tel.: 0603 499 675 redigy
mailto:ondrej.dolezal@pinknet.cz jiraskova 11 olomouc
-------------------------------------- http://www.olomoucke-forum.cz --
Date: Thu, 13 Nov 1997 08:02:50 +0000
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
Comments: Authenticated sender is
From: Petr Vodicka
Organization: MZLU Brno
Subject: Privatni IP adresy
X-To: winnt-l@list.faf.cuni.cz
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT
Vazeni,
nevite prosim Vas, kde lze najit informaci, ktere rozsahy IP adres jsou
volne pouzitelne? (Tzv. neroutovane). Jde mi o to, ze si chci udelat privatni
sit pres Proxy server, a v tetoo lokalni siti nechci pouzivat IP adresy,
ktere by jiz nekdo mohl pouzivat. Nekde sem cetl, ze jsou jiste rozaahy, jez
jsou pro tyto ucely vyclenene, nicmene jiz si nevzpomenu kde.
Diky a s pozdravem P.V.
Petr Vodicka
vodicka@vszbr.cz
Mendelova Zemedelska a Lesnicka Univerzita
UVT Ustav Vypocetni Techniky
Zemedelska 1
61300 Brno 13
tel. 05-4513 5052
Date: Thu, 13 Nov 1997 08:05:26 +0000
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
Comments: Authenticated sender is
From: Petr Vodicka
Organization: MZLU Brno
Subject: IE 4.0 CZ
X-To: winnt-l@list.faf.cuni.cz
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT
Vazeni,
nevite nahodou, zda jiz je k dispozici IE 4.0 CZ. Nekdy v zari - tusim - bylo
zmineno, ze ceska verze by mela byt snad jiz na Invexu.
Diky a s pozdravem P.V.
Petr Vodicka
vodicka@vszbr.cz
Mendelova Zemedelska a Lesnicka Univerzita
UVT Ustav Vypocetni Techniky
Zemedelska 1
61300 Brno 13
tel. 05-4513 5052
Date: Thu, 13 Nov 1997 08:36:46 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Alena Kabelova
Subject: Re: Privatni IP adresy
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-2
Content-Transfer-Encoding: 7bit
Dobry den,
tuto informaci njdete napr. na webu PVT.NET
http://info.pvt.net/cgi-bin/toCP1250/prir052.htm#ip
Alena Kabelova
Petr Vodicka wrote:
>
> Vazeni,
> nevite prosim Vas, kde lze najit informaci, ktere rozsahy IP adres jsou
> volne pouzitelne? (Tzv. neroutovane). Jde mi o to, ze si chci udelat privatni
> sit pres Proxy server, a v tetoo lokalni siti nechci pouzivat IP adresy,
> ktere by jiz nekdo mohl pouzivat. Nekde sem cetl, ze jsou jiste rozaahy, jez
> jsou pro tyto ucely vyclenene, nicmene jiz si nevzpomenu kde.
>
> Diky a s pozdravem P.V.
>
> Petr Vodicka
> vodicka@vszbr.cz
> Mendelova Zemedelska a Lesnicka Univerzita
> UVT Ustav Vypocetni Techniky
> Zemedelska 1
> 61300 Brno 13
>
> tel. 05-4513 5052
Date: Thu, 13 Nov 1997 08:38:40 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Igor Magda
Subject: Re: Internet Groupware?
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii
Vas problem iste moze vyriesit Lotus Notes (v poslednej dobe nazyvany aj
Domino)
http://notes.net/ Tam je mozne stiahnut trial verziu servera aj klienta na
rozne platformy.
V zakladnej verzii to obsahuje email a organizer s moznostou aj skupinoveho
aj osobneho
planovania, zdielanie prostriedkov (miestnosti, auta ...). Plus je mozne si
dorobit aplikacie
priamo pre tento system. Je mozne urobit konfiguraciu uzivatela tak, ze
nebude pouzivat
klasickeho klienta Notes ale vsetko bude pozerat cez WWW prehliadac
(podmienka
je asi HTML 3.2 a mozno aj javascript, to presne neviem). Samozrejme vo
vsetkych
pripadoch je nutne mat Lotus Domino (Notes) server. To je v skratke asi
vsetko.
Igor Magda
NTS s.r.o.
http://www.nts.sk/
Date: Thu, 13 Nov 1997 08:55:25 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Jan Havlicek
Organization: University of Economy, Prague CZ
Subject: Re: Internet Groupware?
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-2
Content-Transfer-Encoding: 7bit
Ondrej X. Dolezal wrote:
>
> Dobry den,
> prominte cross-posting, tezko se hleda spravna newsgroup.
> Hledam reseni problemu provozovani skupinoveho planovani
> bez moznosti mit uzivatele na 1 siti, situaci kdy spojenim
> je Internet.
> Existuje nejaky, dostupny na siti (lepe) nebo komercni
> software ekvivalentni aplikacim jako Organizer ci Schedule+,
> umoznujici data nikoli sdilet nybrz pomoci Internetu distribuovat?
> Vhodnou formou je posilani automatickych mailu se zmenami
> v datech. Nebo: system sdilejici data na serveru, ovsem
> klienti se pripojuji jen obcas - a navic serverem je UNIX?
> -- ondrej x. dolezal
*** Slysel jste nekdy o Lotus NOTES. Rek bychg ze to by mohlo byt ono.
Akorat to stoji relativne dost penez. Ale zase se to umi chovat jako WWW
server takze misto klientu muzete mit trabe Netscape nebooo MS IE.
Zkuste se podivat na http://www.notesnet.cz nebo se po Seznamu mrknout
po dalsich odkazech.
Honza
--
_______ ____
\___ | | |
Jan Havlicek _ \ | _ \ /
Vysoka Skola Ekonomicka |-| _\_| |__|_|__O__||__B<
University of Ekonomics |-|---| +++ __________|)
Prague CZ |-| | ++ ______________|)
E-mail HAVLICEK@VSE.CZ |=|_|___|___________________|==|
-( + )<>-|-|( + )--( + )--\\\
Keep smiling ---------------------------------
Date: Thu, 13 Nov 1997 01:00:00 MET
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: =?ISO-8859-2?Q?Ji=F8=ED_Kuchta?=
Organization: UIVT FEI VUT Brno
Subject: Re: IE 4.0 CZ
In-Reply-To: <199711130552.GAA06850@dahlia.vszbr.cz>
MIME-Version: 1.0
Content-type: text/plain; charset=ISO-8859-2
Content-transfer-encoding: Quoted-printable
Dne 13 Nov 97 v 8:05, napsal(a) Petr Vodicka :
> nevite nahodou, zda jiz je k dispozici IE 4.0 CZ. Nekdy v zari - tusim -=
bylo
> zmineno, ze ceska verze by mela byt snad jiz na Invexu.
Byla a dala se voln=EC st=E1hnout z Invexov=E9ho serveru. Jenom=BEe to m=EC=
lo
kolem 60MB a to se nikomu nepoda=F8ilo. Nav=EDc to byla beta.
MS sl=EDbili, =BEe jakmile to bude mo=BEn=E9, vystav=ED ji na EMWACu.
>
> Diky a s pozdravem P.V.
>
> Petr Vodicka
> vodicka@vszbr.cz
> Mendelova Zemedelska a Lesnicka Univerzita
> UVT Ustav Vypocetni Techniky
> Zemedelska 1
> 61300 Brno 13
>
> tel. 05-4513 5052
> =A0
>
----
Ing. Ji=F8=ED Kuchta (Jiri Kuchta)
Technical University of Brno;
Fac. off Electrical Engineering and Computer Science
Department of Computer Science and Engineering
Bo=BEet=ECchova 2; CZ-61266 Brno; Europe; Earth
+------------------------------------------------------------------
tel: +420-5-7275-222; +420-5-43167-322 fax: +420-5-41211141
mailto:kuchta@fee.vutbr.cz
http://www.fee.vutbr.cz/~kuchta
Fido: 2:421/13.7
+------------------------------------------------------------------
Pegasus Mail - ceska WWW:
http://www.fee.vutbr.cz/~kuchta/pmail
Pegasus Mail - ceska konference:
pmail-cz@fee.vutbr.cz
-----
Czech test: =EC=B9=E8=F8=BE=FD=E1=ED=E9
Date: Thu, 13 Nov 1997 09:48:16 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Michal Kratky
Subject: Re: Privatni IP adresy
In-Reply-To: <199711130549.GAA06832@dahlia.vszbr.cz>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
On Thu, 13 Nov 1997, Petr Vodicka wrote:
> Vazeni,
> nevite prosim Vas, kde lze najit informaci, ktere rozsahy IP adres jsou
> volne pouzitelne? (Tzv. neroutovane). Jde mi o to, ze si chci udelat privatni
> sit pres Proxy server, a v tetoo lokalni siti nechci pouzivat IP adresy,
> ktere by jiz nekdo mohl pouzivat. Nekde sem cetl, ze jsou jiste rozaahy, jez
> jsou pro tyto ucely vyclenene, nicmene jiz si nevzpomenu kde.
Cetl jste to v textech prednasek poradanych PVT resp. jeho Kompetencnim
centrem. Ja jsem to taky absolvoval, a to nahodou vcera. Ze pry to jsou
rozsahy
10.0.0.0 10.255.255.255
172.16.0.0 172.31.255.255
192.168.0.0 192.168.255.255
A ze pry je to vystaveno jako http://info.pvt.net/prirucka/um/um.htm .
Michal Kratky
Date: Thu, 13 Nov 1997 10:30:36 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Daniel Docekal
Subject: Re: IE 4.0 CZ
MIME-Version: 1.0
Content-Type: text/plain
IE 4.0 CZ jest ocekavano nekdy ke konci mesice. Lokalizacni tym udelal
nejakou botu a datum release bylo oddaleno.
Daniel
Date: Thu, 13 Nov 1997 15:00:21 CST
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Jaroslav Lesak
Subject: Zalohovani Win95
X-To: CSINFO-L@adis.cesnet.cz
Mohl by mi nekdo poradit, jak udelat zalozni kopii nainstalovaneho systemu
Win95 na pocitaci nepripojenem do site, pripadne nejake jine opatreni,
abych v pripade havarie nemusel instalovat znovu? Nemohu na nic rozumneho
prijit.
Diky
J. Lesak
Date: Thu, 13 Nov 1997 15:31:52 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: =?ISO-8859-2?Q?Hanu=B9_Adler?=
Organization: PragoData a.s.
Subject: Re: Internet Groupware?
Mime-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
On Wed, 12 Nov 1997, Ondrej X. Dolezal wrote:
> Dobry den,
> prominte cross-posting, tezko se hleda spravna newsgroup.
> Hledam reseni problemu provozovani skupinoveho planovani
> bez moznosti mit uzivatele na 1 siti, situaci kdy spojenim
> je Internet.
>
> Existuje nejaky, dostupny na siti (lepe) nebo komercni
> software ekvivalentni aplikacim jako Organizer ci Schedule+,
> umoznujici data nikoli sdilet nybrz pomoci Internetu distribuovat?
> Vhodnou formou je posilani automatickych mailu se zmenami
Jde-li Vam pouze o distribuci dat, podivejte se na rsync -- je to lepsi
nez rdist, protoze to umi pouzivat ssh (spojeni jsou sifrovana) a navic
to nekopiruje cele soubory ale jen rozdily mezi nimi. Pouzivam to na
Linuxu uz asi dva mesice a zda se, ze to chodi ok.
Tady je kousek manu:
rsync is a program that behaves in much the same way that
rcp does, but has many more options and uses the rsync
remote-update protocol to greatly speedup file transfers
when the destination file already exists.
The rsync remote-update protocol allows rsync to transfer
just the differences between two sets of files across the
network link, using an efficient checksum-search algorithm
described in the technical report that accompanies this
package.
Jako kalendar muzete pak pouzit ical.
S pozdravem,
Hanus Adler
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Public PGP key available by sending mail to me with Subject: send pgp
Date: Thu, 13 Nov 1997 16:45:59 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: "Ondrej X. Dolezal"
Organization: Redigy
Subject: Re: Internet Groupware?
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-2
Content-Transfer-Encoding: 7bit
> Vas problem iste moze vyriesit Lotus Notes (v poslednej dobe nazyvany aj
> Domino) http://notes.net/ Tam je mozne stiahnut trial verziu servera aj
> klienta na rozne platformy. (...)
Na ruzne platformy ano, ale z Unixu jen AIX, Solaris a HPUX.
AFAIK same proprietarni, nikoli free, a neIntelovske systemy.
I tak diky za tip.
> Igor Magda
-- ondrej x. dolezal --------------------------------------------------
tel.: 0603 499 675 redigy
mailto:ondrej.dolezal@pinknet.cz jiraskova 11 olomouc
-------------------------------------- http://www.olomoucke-forum.cz --
Date: Thu, 13 Nov 1997 16:39:08 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: "Ondrej X. Dolezal"
Organization: Redigy
Subject: Re: Internet Groupware?
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-2
Content-Transfer-Encoding: 7bit
> > Existuje nejaky, dostupny na siti (lepe) nebo komercni
> > software ekvivalentni aplikacim jako Organizer ci Schedule+,
> > umoznujici data nikoli sdilet nybrz pomoci Internetu distribuovat?
> > -- ondrej x. dolezal
> *** Slysel jste nekdy o Lotus NOTES. Rek bychg ze to by mohlo byt ono.
> Akorat to stoji relativne dost penez. Ale zase se to umi chovat jako WWW
> server takze misto klientu muzete mit trabe Netscape nebooo MS IE.
> Zkuste se podivat na http://www.notesnet.cz nebo se po Seznamu mrknout
> po dalsich odkazech.
> Honza
Diky - je to presne ten produkt, bohuzel neni k dispozici
pro male Unixy - jen AIX, Solaris a HPUX. Musim hledat dal :(
-- ondrej x. dolezal --------------------------------------------------
tel.: 0603 499 675 redigy
mailto:ondrej.dolezal@pinknet.cz jiraskova 11 olomouc
-------------------------------------- http://www.olomoucke-forum.cz --
Date: Fri, 14 Nov 1997 01:00:00 MET
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: =?ISO-8859-2?Q?Ji=F8=ED_Kuchta?=
Subject: Re: Zalohovani Win95
MIME-Version: 1.0
Content-type: text/plain; charset=ISO-8859-2
Content-transfer-encoding: Quoted-printable
> Mohl by mi nekdo poradit, jak udelat zalozni kopii nainstalovaneho syste=
mu
> Win95 na pocitaci nepripojenem do site, pripadne nejake jine opatreni,
> abych v pripade havarie nemusel instalovat znovu? Nemohu na nic rozumne=
ho
> prijit.
Zkop=EDrovat v=B9echno na jin=FD disk. J=E1 tak WIN95 instaluju. Spust=EDm=
v
nouzov=E9m re=BEimu, ud=ECl=E1m SYS D: a pak pust=EDm FAR (souborov=FD man=
a=BEer
pro W95/WNT, nadmno=BEina NC a VC) ozna=E8=EDm v=B9e a zm=E1=E8nu F5.
Date: Fri, 14 Nov 1997 09:32:41 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
Comments: Authenticated sender is
From: Petr Schauer
Organization: Inst. Sci. Instrum., AS CR, Brno, Czech Rep
Subject: Re: Zalohovani Win95
In-Reply-To: <89062731EE@des.fee.vutbr.cz>
MIME-Version: 1.0
Content-type: text/plain; charset=ISO-8859-2
Content-transfer-encoding: Quoted-printable
> Date: Fri, 14 Nov 1997 01:00:00 MET
> From: Ji=F8=ED Kuchta
>
> > Mohl by mi nekdo poradit, jak udelat zalozni kopii nainstalovaneho sys=
temu
> > Win95 na pocitaci nepripojenem do site, ...
>
> Zkop=EDrovat v=B9echno na jin=FD disk. J=E1 tak WIN95 instaluju. Spust=ED=
m v
> nouzov=E9m re=BEimu, ud=ECl=E1m SYS D: a pak pust=EDm FAR (souborov=FD m=
ana=BEer
> pro W95/WNT, nadmno=BEina NC a VC) ozna=E8=EDm v=B9e a zm=E1=E8nu F5.
Tato rada me moc zajima. Obavam se ale, ze jsem ji nedostal celou.
Zprava mi konci "zmacknutim F5" a to asi neni posledni co je treba
udelat.
Petr
+---------------------------------------------------------------------+
| RNDr. Petr Schauer, CSc. tel.: 05/41514313 |
| Predseda Rady pro pocitacovou sit fax : 05/41514404 |
| AKADEMIE VED CESKE REPUBLIKY 05/41514402 |
| USTAV PRISTROJOVE TECHNIKY e-mail: petr@isibrno.cz |
| Kralovopolska 147, petr@vabo.cz |
| 612 64 Brno www: http://www.isibrno.cz/~petr/ |
+---------------------------------------------------------------------+
Date: Fri, 14 Nov 1997 09:59:25 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Pavel Vachek
Subject: Re: Privatni IP adresy
In-Reply-To: <199711132200.XAA19989@adis.cesnet.cz>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
P. Petr Vodicka se ptal:
>
> nevite prosim Vas, kde lze najit informaci, ktere rozsahy IP adres jsou
> volne pouzitelne? (Tzv. neroutovane). Jde mi o to, ze si chci udelat privatni
> sit pres Proxy server, a v tetoo lokalni siti nechci pouzivat IP adresy,
> ktere by jiz nekdo mohl pouzivat. Nekde sem cetl, ze jsou jiste rozaahy, jez
> jsou pro tyto ucely vyclenene, nicmene jiz si nevzpomenu kde.
>
Je to popsano v dokumentu RFC1918 (Address Allocation for Private
Internets). Odkaz na nej najdete napr. na domovske strance CESNET
NICu na adrese http://sup.cesnet.cz/nic.
Jsou to tyto adresy:
10.0.0.0 - 10.255.255.255 (10/8 prefix)
172.16.0.0 - 172.31.255.255 (172.16/12 prefix)
192.168.0.0 - 192.168.255.255 (192.168/16 prefix)
Omlouvam se, ze odpovidam az ted; ctu jen DIGEST teto konference.
Zdravi Vas Pavel Vachek, CESNET NIC.
Date: Fri, 14 Nov 1997 01:00:00 MET
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: =?ISO-8859-2?Q?Ji=F8=ED_Kuchta?=
Subject: Re: Zalohovani Win95
MIME-Version: 1.0
Content-type: text/plain; charset=ISO-8859-2
Content-transfer-encoding: Quoted-printable
> > > Mohl by mi nekdo poradit, jak udelat zalozni kopii nainstalovaneho s=
ystemu
> > > Win95 na pocitaci nepripojenem do site, ...
> >
> > Zkop=EDrovat v=B9echno na jin=FD disk. J=E1 tak WIN95 instaluju. Spust=
=EDm v
> > nouzov=E9m re=BEimu, ud=ECl=E1m SYS D: a pak pust=EDm FAR (souborov=FD=
mana=BEer
> > pro W95/WNT, nadmno=BEina NC a VC) ozna=E8=EDm v=B9e a zm=E1=E8nu F5.
>
> Tato rada me moc zajima. Obavam se ale, ze jsem ji nedostal celou.
> Zprava mi konci "zmacknutim F5" a to asi neni posledni co je treba
> udelat.
Snad umite ovladat Nortona, ne?
Date: Fri, 14 Nov 1997 11:27:52 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Dan Lukes
Organization: FIO a.s., Senovazne nam. 24, Praha
Subject: Re: Zalohovani Win95
MIME-Version: 1.0
Content-type: text/plain; charset=ISO-8859-1
Content-transfer-encoding: Quoted-printable
> > From: Ji =ED Kuchta
> > > Mohl by mi nekdo poradit, jak udelat zalozni kopii nainstalovaneho s=
ystemu
> > > Win95 na pocitaci nepripojenem do site, ...
> > nouzov=E9m re imu, ud l=E1m SYS D: a pak pust=EDm FAR (souborov mana =
er
> > pro W95/WNT, nadmno ina NC a VC) ozna =EDm v e a zm=E1 nu F5.
> Tato rada me moc zajima. Obavam se ale, ze jsem ji nedostal celou.
> Zprava mi konci "zmacknutim F5" a to asi neni posledni co je treba
> udelat.
Nechci panu Kuchtovi kecat do remesla, ale snad se nemylim, ze u "F5"
to skutecne konci (vada toho dopisu je jina - je cesky do konference, kde
se na tom ucastnici nedohodli, ale to neni ted dulezite).
SYS D: vam prenese system na zalozni disk, "F5" zmineneho programu tam
prenese i s dlouhymi nazvy vsechny soubory. Co byste potreboval pro
identickou kopii disku vic ?
Dan
Dan Lukes (FIO holding, a.s.) tel: +420 2 24102204, fax: ...301
root, webmaster, postmaster and othermaster of FIONet
AKA: dan@obluda.cz, dan@freebsd.cz, dan@kolej.mff.cuni.cz
Date: Fri, 14 Nov 1997 15:28:33 CST
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Jaroslav Lesak
Subject: Re: Zalohovani Win95
X-To: CSINFO-L@adis.cesnet.cz
Diky za radu, je to presne co jsem potreboval. Sam jsem to zkousel
podobne, nenapadlo me ale pustit Windows v nouzovem rezimu a NC mi pak
odmitl udelat kopii nekolika souboru.
J. Lesak
Date: Fri, 14 Nov 1997 15:11:54 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: =?ISO-8859-2?Q?Luk=E1=B9_Mi=BEoch?=
Organization: SPSCH akad. Heyrovskeho v Ostrave
Subject: Logicke a fyzicke disky
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT
Dobry den.
Kamarad ma jeden problem a pozadal me, abych se pozeptal, jestli nekdo
nevi, jak na to.
Oc se jedna:
Ma fyzicky disk C: a na nem ma nekolik logickych disku (dejme tomu D:,
E: a F:). Kdyz si do pocitace prida druhy disk, prihlasi se ten druhy
disk jako D: a logicke disky se posunou (tedy E:, F: a G:). Neslo by
zaridit, aby se druhy disk prihlasil az na konec rady (tedy ne jako D:
ale jako G: a log. disky zustaly tam, kde jsou)?
+-----------------------------------------------+
| Lukas Mizoch, student (ragimiri@usa.net) |
+-----------------------------------------------+
| Science Faculty, The University of Ostrava |
+-----------------------------------------------+
| http://www1.osu.cz/home/xmizoch |
| http://www.geocities.com/EnchantedForest/9119 |
+-----------------------------------------------+
| I'm using ISO-8859-2 friendly mail client. |
+-----------------------------------------------+
Date: Fri, 14 Nov 1997 15:57:34 GMT
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Martin Vobr
Organization: VSE na Zizkove
Subject: Re: Internet Groupware?
Ondrej X. Dolezal (ondrej.dolezal@pinknet.cz) wrote:
: Dobry den,
: prominte cross-posting, tezko se hleda spravna newsgroup.
: Hledam reseni problemu provozovani skupinoveho planovani
: bez moznosti mit uzivatele na 1 siti, situaci kdy spojenim
: je Internet.
Neco takoveho nabizi Digital - jmenuje se to Altavista Forum, urcite je to
pro NT, jestli existuje verze pro Unix nevim. Zkuste se zeptat na ceskem
zastoupeni digitalu.
--
---------------------------------------------------------------------------
Jedina jistota je, Martin Vobr at Prague University of Economics wWWWw
ja nerozumim tobe mail: xvobm02@manes.vse.cz -o-o-
a ty mne .... www: http://manes.vse.cz/~xvobm02 ~ - ~
(Zuby nehty) hardware: PC Pentium + brain ~~~
tel/fax: +042 (02) 788 13 52
Date: Thu, 13 Nov 1997 11:10:00 UTC
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Henry_Zigmund@WVI.ORG
Subject: Zalohovani Win95 - GHOST
Diky za radu, je to presne co jsem potreboval. Sam jsem to zkousel
podobne, nenapadlo me ale pustit Windows v nouzovem rezimu a NC mi pak
odmitl udelat kopii nekolika souboru.
J. Lesak
Ja pouzivam maly programek z New Zealand - jmenuje se Ghost a dela
kompletni obrazek hard disku se vsemi logickymi disky a schova to
kompresovane kamkoliv jinde, treba na pridavny paralelni disk. Malou
nevyhodou je, ze pri kopirovani zpatky nejdou urcit jednotlive soubory,
ktere by clovek chtel dostat ze zalohy tak jako pri normalnim zalohovani.
Ghost proste vytvori uplne stejnou kopii hard disku se vsim, co na nem
bylo, takze kdyz nainstaluju nejaky novy program, musim udelat novy
"obrazek" disku. Pri rychlych paralelnich discich (pouzivam MAXTOR 7GB
v EIDE bednicce QuickDrive - cele to prislo na $420) se da dosahnout
prenosu az 60 MB za minutu, takze i velke disky se daji do pul hodiny
zalohovat. Kdyz potom naplnim 650 MB, tak vypalim CD a schovam to.
Samozrejme ze DATA se musi zalohovat denne, takze kdyz je treba dostat
uzivatele zpatky na nohy, proste vezmu novy disk, Ghost mi ho nalozi do
puvodniho stavu a potom z pasky pres sit prevalcuju data directory. Cely
proces s vymenou disku trva mene nez hodinu. Ghost byl na jare k dostani
od Binary Research Ltd.
Nasleduje kousek z jejich manualu - na konci jsou zajimave odpovedi na
vseobecne otazky o programu. Lidicky - prosim neberte to jako ze delam
reklamu na produkt - tento maly programek (180 kB) mi hrozne moc usnadnuje
zivot, obzvlaste kdyz se nase predstavenstvo rozhodlo vskocit rovnyma
nohama do WIN-95. Na zacatku roku jsem zoufale hledal na trhu neco, co
by stoprocetne zalohovalo WINDOWS 95 se vsim vsudy uvnitr systemu a nic
jsem nenasel. Potom jsem objevil tenhle zazrak (tehdy stal pod 30 US
dollaru - ted je to podstatne drazsi, ale tahle verze co mam - 2.0.7
uplne staci) a dycha se mi ted mnohem, mnohem volneji. Takze tak:
Ghost User Manual
Copyright 1996 Binary Research Ltd
Introduction
Ghost is designed to minimize the installation times for operating systems
such as Win95, WinNT and OS/2. This is particularly useful to organizations
which have a large number of similarly configured workstations to install.
For example, Ghost reduces the time to install a typical 300 megabyte Win95
system from an hour with substantial operator input to about 5 minutes with
no operator input required. In addition, multiple workstations may be
installed at the same time which further improves efficiency.
With Ghost tedious tasks such as FDISKing and FORMATing disks are a thing
of the past - Ghost dynamically FDISKs and FORMATs the target disk,
allowing FAT partitions to be expanded or contracted to fit the target.
Ghost is designed to be run under DOS and can be run from a DOS boot
diskette. Although DOS-based it can handle Win95/WinNT long file names,
NTFS partitions, OS/2 extended attributes and even OS/2 boot manager
partitions.
Ghost has two modes of operation - a simple, robust, menu driven user
interface, and, to further aid automating the installation process, a
batch mode. Prior to Win95 there was little need for a utility like
Ghost, as systems could be installed by simply using the DOS XCOPY
command. Win95 introduced long file names, XCOPY could no longer do
the job - hence the need for a utility like Ghost.
Not only is Ghost the fastest way to install Win95, WinNT and OS/2, it
has another handy use - it can make complete backups of disks, even
copying "in-use" system files which are missed by other backup utilities.
Overview
Ghost is essentially a disk copying program. The entire contents of a disk
may be copied from one disk to another, or they may be copied to a disk
image file, and that image file can then be used as a template to create
copies of the original disk. Each disk is made up of a Master Boot Record
and from 1 to 4 primary partitions. Primary partitions are physical separate
areas of the disk, and are usually defined by the FDISK utility. Primary
partitions may be further subdivided into logical drives, once again using
the FDISK utility. However, it is not important to understand the exact
details of how a disk is subdivided. Ghost copies every partition,
regardless of type, from the source (disk or disk -image file) to the
destination. If the source and destination disks were identical in size
and structure then all that would be needed is a sector by sector copy;
but in practice this is seldom the case. Ghost positions each partition
or logical drive on the target disk using the same rules as FDISK. In
addition, if the partition is a FAT type (90% are, the most common
exceptions are NTFS and HPFS), Ghost allows the target partition to be
expanded or contracted.
Installation
Ghost requires no special installation procedures. It is supplied in a
zip file (GHOST.ZIP) if downloaded from http://www.ghostsoft.com, or in
unzipped form if supplied on diskette. Because Ghost is designed to be
run on any PC (in accordance with the Ghost licensing rules) it does not
need to be installed, but can be run from a DOS boot diskette. Of course
the Ghost files can be copied onto a hard drive for improved performance.
From http://www.ghostsoft.com
Ghost started life as a product that could be downloaded from the Internet
with a free 30 day evaluation. It still can - just click on the Download
option and select Ghost for Dos. The file GHOST.ZIP will be copied to your
system, use PKZIP or WinZip to unzip. The files contained are:
File Description
readme.gho Contains list of latest modifications, bug fixes, ordering
and pricing information.
ghost.exe This is the one that does all the work.
ghost.env Sample Ghost environment file.
ghost.doc The ghost manual in Word for Windows format
The evaluation copy is a fully functional single user version, but it
will time-out at the end of the month. As of revision 1.4.7 of Ghost
there is nothing to stop repeated downloading of Ghost at the start of
each month, but there will be in future versions.
Do not try and change the system date to fool Ghost - it independently
checks the system date and will not complete the clone/dump/load operation
if the system date has been set back.
To convert an evaluation copy into a fully fledged version, see Ordering
for more information.
From diskette with/without the manual: Ghost is supplied in a packaged
form, either with or without the manual. The contents of the disk are
the same as in the downloadable version - except, of course ghost.exe
has no timeout.
Using GHOST inside of Windows95 from a DOS Window
Ghost has succsesfully run inside of Windows95 to save an image file of
the Windows95 that your running ghost on. However it is not as reliable;
the saving of the image file might fail. If it does fail, you will need
boot from a bootable diskette that has the neccesary network driver
allowing you to attatch to the network, and save the hard drive as an
image file.
FAQ
Can Ghost for DOS handle long file names for Windows'95, Window's NT
and OS/2?
- Yes.
Will it work with mixed SCSI and IDE drives?
- This depends on the operating system. It will do the copy successfully,
but if you try and reboot then the correct disk drivers may not be
present, Win95 tends to be more forgiving than OS/2 and WinNT.
Can the disk image be compressed?
- The disk images for FAT (Win 3.x) and VFAT (Win95) only include the data
for directories and files. For other partition types the partition is
treated like a "black box" and all sectors are copied. We are currently
investigating ways of compressing NTFS partitions.
Will it work on systems with multiple Operating Systems loaded.
- Yes, subject to any limitations on the operating systems. Eg for Linux
and SCO Unix the target disk must be identical to the source disk.
Does Ghost support the beta Win9x with it's FAT32 tables?
- It will by 15-Dec-96.
Does it work over TCP/IP? What network protocols do work?
- For general usage, all that is required by Ghost in Local/Server mode
is that the server drive(s) are visible. Eg. if the server drive was G:
then the workstation would need to connect to the server with the
appropriate network software so that the workstation could access
the G: drive. In this way Ghost is independent of the underlying
network protocol. In the less common peer-to-peer connection situation
via NetBios, then NetBios must be supported by the network protocol.
Most protocols do support NetBios eg TCP/IP, IPX/SPX.
Does Ghost work with NTFS? How about HPFS?
- Ghost will currently work with both NTFS and HPFS but it is clumsy.
Ghost currently does not understand the internal format of NTFS or
HPFS, so it resorts to a sector by sector copy. This is slower than
just copying the data and does not allow expanding or contracting the
partitions. Making Ghost understand NTFS partitions is a top development
priority.
Can Ghost work with WinNT? What about SIDS (Security Identifiers)?
- Yes, Ghost will work with WinNT. Care must be taken when cloning WinNT
workstations to avoid SID problems. See Cloning WinNT for more
information.
Does Ghost work with NetWare (by Novell) servers?
- Ghost can dump and restore workstation disk images to and from a NetWare
server, however it has not been tested duplicating a NetWare server. It
is unlikely to work.
Can GHOST do a push install to a client running just TCP/IP?
No.
Why is it the only backup that doesn't clobber long file names in Win95?
- Because GHOST gets underneath the usual file system interface and deals
directly with the low level file structure.
Can a WinNT system be replicated to a different size disk?
- If the partition type is FAT, then yes. If the partition type is NTFS,
then yes (providing the target disk is at least as big as the source
disk). When Ghost is fully NTFS capable then the target disk may be
smaller then the source (providing there is enough room for the data).
When I do a dir /a /s on the original hard drive from the root I get
4,295 files, but on the target drive I get 4,294 files. Why?
- Some temporary files are not included when copying a FAT partition.
These are: SWAPPER.DAT, WIN386.SWP, SPART.PAR, PAGEFILE.SYS and
386SPART.PAR
Excluding these files speeds the copy and reduces the size of the
disk image files.
Does Ghost transfer data from one computer to another like Laplink
or Fastlynx?
- Yes, Ghost is capable of data transfer via the printer ports. Typical
data transfer speed is 5-6 megabytes/minute.
How does Ghost load an image back to the hard drive without first
formatting the hard drive?
- To save time, Ghost formats "on the fly".
When I copy an image from a 200 Megabyte hard drive to a 1 gigabyte
hard drive what about the rest of the 800 megabyte free space?
- It gets formatted and is made part of the partition. The free space
is available for use immediately.
How fast does Ghost work?
- This depends on what Ghost is doing and the speed of the system.
For a disk-to-disk copy speeds range from 20 megs/minute to 100
megs/minute. For a Network copy speeds range from 10 megs/minute
to 70 megs/min.
Ordering
There are a number of ways to order Ghost:
* Use the Print'n'Fax form found on our www site: www.ghostsoft.com
* Use our toll free number 1 (800) 817 5119 and supply credit card
details (inside U.S. and Canada only)
* Outside the toll free area, call +1 (414) 964 2200
* Email to ghost@execpc.com
* Fax your order directly to +1 (414) 964 2201
Ghost Technical Support
If you experience a problem with Ghost, the first step is to load the
latest version from http:www.ghostsoft.com to see if the problem persists.
If it does then please fill out the following sheet and fax to
+1 (414) 964 2201 or email the details to ghost@execpc.com
Tot vse. Snad to nekomu pomuze!
Ing. Jindrich Zigmund
World Vision Intl.
henry_zigmund@wvi.org
1-626-301-7777
Date: Fri, 14 Nov 1997 21:50:04 +0000
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Petr Snajdr
Subject: Re: Zalohovani Win95 - GHOST
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
> Ja pouzivam maly programek z New Zealand - jmenuje se Ghost a dela
> kompletni obrazek hard disku se vsemi logickymi disky a schova to
> kompresovane kamkoliv jinde, treba na pridavny paralelni disk. Malou
Tak me napada, ze mam podobny program, ale pro Linux.
funguje takto cat /dev/hda|gzip >/kam_to_ulozit
:)))
BTW: Nestoji ani 1 $ :)))
--
S pozdravem
Petr Snajdr
Date: Fri, 14 Nov 1997 22:02:56 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Mostek Martin
Subject: SLIP na W95
X-To: net@cs.felk.cvut.cz
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Svagr potrebuje ve W95 naistalovat SLIP a nejak se mu to nedari. Mnoho
blizsiho nevim. Aby se mohl pripojit k ceskobudejovickemu providerovi
(IBM?) potrebuje prave slip a ten se ho pta na cisla gatewaye ap. coz mu
nerekli. PPP se pry pouzit neda.
Prosim, prosim moc me nebijte za tak neurcity dotaz. Doplnujici otazky se
pokusim zodpovedet (resp. zjstit a zodpovedet) a za kazdou odpoved a info
dekuji.
Martin Mostek
Date: Thu, 13 Nov 1997 14:50:00 UTC
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Henry_Zigmund@WVI.ORG
Subject: Re[2]: Zalohovani Win95 - GHOST
> Ja pouzivam maly programek z New Zealand - jmenuje se Ghost a dela
> kompletni obrazek hard disku se vsemi logickymi disky a schova to
> kompresovane kamkoliv jinde, treba na pridavny paralelni disk. Malou
Tak me napada, ze mam podobny program, ale pro Linux.
funguje takto cat /dev/hda|gzip >/kam_to_ulozit
:)))
BTW: Nestoji ani 1 $ :)))
***
ze by "cat" rozumel Strukture Master Boot Recordu a Partition Tables na
hard disku? Fyzicke sektorovani and formatovani bloku za chodu? Hmmmmm...
Ja vim, ja vim, ... joke... Pro ty, kteri maji trpelivost a veri nesmyslum,
ktere Microsoft publikuje of vnitrnostech WIN-95, tady je jejich navod na
to, jak klonovat WIN-95 disky:
STEP A:
1. Create bootable Startup disk
- Run ERU to backup ten critical files
- Add FORMAT.COM from \WINDOWS\COMMAND
2. Backup system's long filenames
- Run LFNBK /B (\ADMIN\APPTOOLS\LFNBACK)
- Turn off tunneling; read LFNBK.TXT
3. Use DOS-based backup software from the MS-DOS Mode prompt
STEP B:
1. Format drive with WIN-97 bootable floppy
- FORMAT C:/S
2. Install DOS-based backup software
- Move info from backup media to new PC's drive
3. Use bootable Startup disk with ERU files to restore the 10 critical
files (A:\ERD.EXE)
4. Run LFNBK /R (to restore systems long filenames - LNF)
- Turn tunneling back on.
Zkusil jsem to, slo to dobre az do bodu 4 STEP B a po pokusu vratit dlouha
jmena zpatky se WIN-95 zhroutilo uplne a pomohlo az zformatovani disku.
Ghost pracoval napoprve. Kdyz je novy disk vetsi nez puvodni, dovoli
nechat misto pro dalsi partition, nebo to proste nafutruje cele a necha
zformatovane misto na konci disku. Je to neskonaly pomocnik v pripade,
ze je treba pouzit System Commander pro lidi, kteri chteji mit oboji
WIN 3.x a WIN-95 na jednom disku. Hodne stesti pro ty, kterym to pomuze!
Jindra Zigmund
Date: Sat, 15 Nov 1997 11:20:34 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Hynek Med
Organization: Prague University of Economics
Subject: Re: Re[2]: Zalohovani Win95 - GHOST
Mime-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
On 15 Nov 1997 Henry_Zigmund@WVI.ORG wrote:
>
> Tak me napada, ze mam podobny program, ale pro Linux.
> funguje takto cat /dev/hda|gzip >/kam_to_ulozit
> :)))
> BTW: Nestoji ani 1 $ :)))
>
> ***
> ze by "cat" rozumel Strukture Master Boot Recordu a Partition Tables na
> hard disku? Fyzicke sektorovani and formatovani bloku za chodu? Hmmmmm...
Ach jo. /dev/hda je uplne cely disk, vcetne partition table, MBR atd..
Ano, je kdyby neco takoveho mel Microsoft, jmenovalo by se to Microsoft
LiveFormat OnTheFly 97.
Hynek
--
Hynek Med, xmedh02@manes.vse.cz
Date: Sat, 15 Nov 1997 01:00:00 MET
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: =?ISO-8859-2?Q?Ji=F8=ED_Kuchta?=
Subject: Re: Zalohovani Win95
MIME-Version: 1.0
Content-type: text/plain; charset=ISO-8859-2
Content-transfer-encoding: Quoted-printable
> Diky za radu, je to presne co jsem potreboval. Sam jsem to zkousel
> podobne, nenapadlo me ale pustit Windows v nouzovem rezimu a NC mi pak
NC neni dobry, protoze nezachova dlouha jmena. Na to je prave FAR
znacka "Ideal". A pokud se nezkopiruje SWAP, tak zadna skoda, ne? Je
fakt, ze je problem jeste s jednim souborem ktery se jmenuje "Dopln=ECk
"Auto Play" " - opravdu, uvozovky ve jm=E9nu. Holt Microsoft...
Date: Sat, 15 Nov 1997 01:00:00 MET
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: =?ISO-8859-2?Q?Ji=F8=ED_Kuchta?=
Subject: Re: Logicke a fyzicke disky
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT
> Ma fyzicky disk C: a na nem ma nekolik logickych disku (dejme tomu D:,
> E: a F:). Kdyz si do pocitace prida druhy disk, prihlasi se ten druhy
> disk jako D: a logicke disky se posunou (tedy E:, F: a G:). Neslo by
> zaridit, aby se druhy disk prihlasil az na konec rady (tedy ne jako D:
> ale jako G: a log. disky zustaly tam, kde jsou)?
Slo, ale nesmi na tom druhem disku bit primarni partition
(bootovatelnou). Kdyz tam bude jenom extended, tak to bude OK.
Date: Mon, 17 Nov 1997 10:25:38 CST
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Jaroslav Lesak
Subject: Re: Zalohovani Win95
X-To: CSINFO-L@adis.cesnet.cz
On Sat, 15 Nov 1997 01:00:00 MET,
=?ISO-8859-2?Q?Ji=F8=ED_Kuchta?= wrote:
>
>NC neni dobry, protoze nezachova dlouha jmena. Na to je prave FAR
>znacka "Ideal". A pokud se nezkopiruje SWAP, tak zadna skoda, ne? Je
>fakt, ze je problem jeste s jednim souborem ktery se jmenuje "Dopln=ECk
>"Auto Play" " - opravdu, uvozovky ve jm=E9nu. Holt Microsoft...
>
>
NC pro Win95 samozrejme dlouha jmena zachova, ale je dost pomaly. FAR bych
rad vyzkousel, jak se da ziskat ?
J. Lesak
Date: Mon, 17 Nov 1997 12:13:50 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Milan Rott
Subject: Re: Zalohovani Win95
In-Reply-To: <50847.clitam@mbox.cesnet.cz>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
On Mon, 17 Nov 1997, Jaroslav Lesak wrote:
* >On Sat, 15 Nov 1997 01:00:00 MET,
* >=?ISO-8859-2?Q?Ji=F8=ED_Kuchta?= wrote:
* >
* >>
* >>NC neni dobry, protoze nezachova dlouha jmena. Na to je prave FAR
* >>znacka "Ideal". A pokud se nezkopiruje SWAP, tak zadna skoda, ne? Je
* >>fakt, ze je problem jeste s jednim souborem ktery se jmenuje "Dopln=ECk
* >>"Auto Play" " - opravdu, uvozovky ve jm=E9nu. Holt Microsoft...
* >>
* >>
* >NC pro Win95 samozrejme dlouha jmena zachova, ale je dost pomaly. FAR bych
* >rad vyzkousel, jak se da ziskat ?
* >
* >J. Lesak
* >
FAR verze 1.00 Beta 4 pro Windows95 lze najit na nasledujici adrese
ftp://ftp.fzu.cz/pub/pc/FILEMANAGERS v samorozbalovacim souboru
FAR100B4.EXE
Milan Rott
/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~/|
/______________________________________________________________________/ |
| Milan Rott | phone: +420-2-24311137 ext. 433 | |
| Institute of Physics | fax: +420-2-3123184 | |
| Cukrovarnicka 10 | e-mail: rott@fzu.cz | |
| Praha 6 | www: http://www.fzu.cz/dep/SAVT/rott/moje.html|/
\______________________________________________________________________/
Date: Mon, 17 Nov 1997 12:28:22 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Radoslav BENDIK
Organization: Slovak Technical University
Subject: Re: Zalohovani Win95
Mime-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
On 17 Nov 1997, Jaroslav Lesak wrote:
> NC pro Win95 samozrejme dlouha jmena zachova, ale je dost pomaly. FAR bych
> rad vyzkousel, jak se da ziskat ?
>
> J. Lesak
Zdravim,
primary site: ftp://ftp.elf.stuba.sk/pub/pc/utilfile/far150b.exe
... a na dalsich SAC mirroroch (napr ftp://ftp.vse.cz/pub/msdos/SAC)
--bye,
rado b
+-------------- /""\ -----------------------------------------------------+
| /""\ / _/ e-mail Radoslav.Bendik@st.fmph.uniba.sk |
| ( (_/ / \ url http://turing.fmph.uniba.sk/~4bendik |
| \ ado ( __/endik, student 4ftf, MFF UK Bratislava, Slovensko |
+----- ) -----------------------------------------------------------------+
/
Date: Tue, 18 Nov 1997 09:19:05 GMT
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Vladimir Horak
Organization: Charles University
Subject: Re: Zalohovani Win95
Jaroslav Lesak (clitam@beba.cesnet.cz) wrote:
: Mohl by mi nekdo poradit, jak udelat zalozni kopii nainstalovaneho systemu
: Win95 na pocitaci nepripojenem do site, pripadne nejake jine opatreni,
: abych v pripade havarie nemusel instalovat znovu? Nemohu na nic rozumneho
: prijit.
Narazil jsem na nasledujici (ale jeste nevyzkousel):
> I have uploaded to Simtel.Net:
>
> http://www.simtel.net/pub/simtelnet/win95/diskutl/hd95cp27.zip
> ftp://ftp.simtel.net/pub/simtelnet/win95/diskutl/hd95cp27.zip 83841 bytes
>
> hd95cp27.zip Backup/restore Windows 95 from DOS
>
> HD95COPY is a DOS program to back up and restore a Windows 95 drive from
> DOS level in a few minutes. You do not have to install Windows to do a
> backup or restore! HD95COPY supports FAT16 drives. The backup file can
> be stored on on a network server, another hard disk, removable media or
> any medium you can access by a drive letter. You can span your backup
> file over some removable media. The hard disk is copied sector by
> sector, thus longfilenames and hidden files/directories are also backed
> up. To save space and time only used clusters are copied. Unused
> clusters are skipped to keep the backup file as small as possible. On a
> network with identical stations it is very useful to configure one
> station, use HD95COPY to save the hard disk to an image file on the file
> server and then restore from there to the other stations. The target
> drive does not have to be the same size as the source drive. On a
> network you can automatically set some registry entries for each station
> like IP address, computername or comment.
>
> Special requirements: None.
>
> Changes: More command line parameters, enhanced performance.
>
> hd95cp27.ziop replaces hd95copy.zip
>
> Shareware. Uploaded by the author.
>
> Gottfried Siehs
> g.siehs@tirol.com
> http://www.geocities.com/SiliconValley/Lakes/8753/
>
--
Vladimir Horak
Charles University Computer Centre
Tel. (420 2) 244 91 235
Date: Tue, 18 Nov 1997 11:22:44 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Petr Simek
Subject: Re: Zalohovani Win95
In-Reply-To: <64rmi9$6kh1@golias.ruk.cuni.cz>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
On Tue, 18 Nov 1997, Vladimir Horak wrote:
> > I have uploaded to Simtel.Net:
> >
> > http://www.simtel.net/pub/simtelnet/win95/diskutl/hd95cp27.zip
> > ftp://ftp.simtel.net/pub/simtelnet/win95/diskutl/hd95cp27.zip
Nasel jsem ho na :
ftp://ftp.vse.cz/pub/.ccd4c/simtelnet/win95/diskutl
pod nazvem :
hd95c27d.zip
Vyse uvedene nefungovalo ...
> Vladimir Horak
> Charles University Computer Centre
*------------------------------------------------------------------------*
| Petr Simek APS JU |
| petrsi@jcu.cz |
*------------------------------------------------------------------------*
Date: Tue, 18 Nov 1997 12:14:57 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: =?ISO-8859-2?Q?Luk=E1=B9_Mi=BEoch?=
Organization: SPSCH akad. Heyrovskeho v Ostrave
Subject: EMM386 a HIMEM pro Win 3.1
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT
Dobry den.
Chel bych se zeptat, zda nekdo nezna parametry pro uvedene dva
prikazy. Jedna se o to, ze nerespektuji parametry prikazu pro DOS
v CONFIG.SYS (DEVICE=xxx /yyy /zzz) a opravdu nevim, kde to mam
zjistit.
P.S.: Maji vubec nejakou vyhodu oproti DOSovskym (krome toho, ze jsou
v cestine)?
+-----------------------------------------------+
| Lukas Mizoch, student (ragimiri@usa.net) |
+-----------------------------------------------+
| Science Faculty, The University of Ostrava |
+-----------------------------------------------+
| http://www1.osu.cz/home/xmizoch |
| http://www.geocities.com/EnchantedForest/9119 |
+-----------------------------------------------+
| I'm using ISO-8859-2 friendly mail client. |
+-----------------------------------------------+
Date: Tue, 18 Nov 1997 14:12:29 MET
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Rost'a Kocman
Organization: Studovna SKM VUT Brno
Subject: Re: EMM386 a HIMEM pro Win 3.1
In-Reply-To: <16D02B423C5@novelle2.heyr.pvtnet.cz>
MIME-Version: 1.0
Content-type: text/plain; charset=ISO-8859-2
Content-transfer-encoding: Quoted-printable
On 18 Nov 97 at 12:14, Luk=E1=B9 Mi=BEoch wrote:
> P.S.: Maji vubec nejakou vyhodu oproti DOSovskym (krome toho, ze jsou
> v cestine)?
Jsou starsi, nez ty v MsDOS 6.22. To ale vyhoda neni.
Rost'a
Date: Wed, 19 Nov 1997 12:19:57 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: =?ISO-8859-2?Q?Luk=E1=B9_Mi=BEoch?=
Organization: SPSCH akad. Heyrovskeho v Ostrave
Subject: EMM a HIMEM (2)
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT
Pripojuji k predeslemu dotazu jeste tyto:
1. Pokud pouziji EMM386 z MS-DOSu, pak se pred spustenim Windows
napise neco takoveho: "Enhanced Mode Windows cannot run due to base
memory back fill."
2. Nevi nekdo o nejakem prohlizeci HTML pro Windows? Netscape doma
nemuzu nainstalovat a Explorer mi pripada prilis teskopadny.
3. Nevi nekdo o free -programku, ktery by hlidal, co se kam instaluje
a pripadne by to pak byl schopen odstranit?
Predem dekuji za vsechny odpovedi.
+-----------------------------------------------+
| Lukas Mizoch, student (ragimiri@usa.net) |
+-----------------------------------------------+
| Science Faculty, The University of Ostrava |
+-----------------------------------------------+
| http://www1.osu.cz/home/xmizoch |
| http://www.geocities.com/EnchantedForest/9119 |
+-----------------------------------------------+
| I'm using ISO-8859-2 friendly mail client. |
+-----------------------------------------------+
Date: Thu, 20 Nov 1997 11:18:40 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Matus Uhlar
Organization: Slovak Academic Network Kosice
Subject: Re: EMM a HIMEM (2)
In cz.net.csinfo was written by Luk?? Mi?och :
-> 1. Pokud pouziji EMM386 z MS-DOSu, pak se pred spustenim Windows
-> napise neco takoveho: "Enhanced Mode Windows cannot run due to base
-> memory back fill."
ktory DOS ktore windows ? Odporuca sa vzdy pouzit novsiu verziu HIMEM aj
EMM386... ale je mozne ze pouzivate nejaky divoky parameter... alebo nejaky
potrebny nepouzivate.
--
Matus "fantomas" Uhlar, sysadmin of one server at SANET Kosice, Slovakia
E-mail: Matus.Uhlar@tuke.sk ; WWW: http://ccsun.tuke.sk/users/uhlar
And don't forget: I work for SANET, but talk for myself, dude... ;-)
Date: Thu, 20 Nov 1997 12:12:56 GMT
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: Marek Nemec V0959
Organization: Stavebni fakulta CVUT, Praha
Subject: Test
Mime-Version: 1.0
Content-Type: Text/Plain; charset=US-ASCII
Testuji !!!
Date: Fri, 28 Nov 1997 15:33:17 +0100
Reply-To: Diskuse o mistnich problemech v siti
Sender: Diskuse o mistnich problemech v siti
From: administrator listu
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
pouze test 28/11